Multipurpose cutting
Unique And Quality Is Irreplaceable
|
PEGATEC-SCISSORSHAND, providing you any material’s cutting and application under complex environment. |
The latest technology endows the ALL-IN-ONE function to PEGATEC-SCISSORSHAND. There is no need to change the products frequently when cutting various materials, then improving the working efficiency. |
-
Product Advantages
Super Long durability
High-speed cutting
No need to change the wheels even for different material’s cutting.
Comfortable cutting experience
Economic
Packed with Anti-damping Sealed box(part of the products)
-
Application
Material of Thin-walled tube
Various section bars
Material of Solid Pipe
Various Plates
-
Cutting Material
Stainless Steel、acid-resistant steel
Tool steel
High-tensile structural steel
Aluminium Alloy, Aluminium, Copper
Rigid plastic, PVA
Concrete, Brick
You can use SCISSORSHAND to achieve the following result.
-
Soft Work Piece:
SCISSORSHAND can cut a 12mm steel rebar in 4 seconds, and only lost 5% after cutting 3X3 L shape steel 30 times
-
Stainless Steel:
It has high requirement to the surface finish. The workers don’t like burr and burn stains on the surface after cutting. It will mean re-working. With high efficiency of cutting, SCISSORSHAND will make no burr and burn stains.
-
Aluminium:
The normal cutting disc can’t be used for aluminium material. The 100% purity aluminium is very soft, it will block the hole on the surface of cutting disc. In this case, the cutting disc will slip and never end. SCISSORSHAND shows the advantage obviously at this time, it cuts aluminium smoothly and left no pollution to the surface. It also easy to cut the aluminium allo
-
.jpg)
Cast iron and stone:
Cast iron is of high hardness. There is a common feature of cast iron and stone-fragile. This high hardness and fragile material requires highly to the cutting disc which should ensure the durability. SCISSORSHAND optimizes the performance on cast iron and stone. The durability is 20% higher than the normal products.